I ordered new brood boxes from Mann Lake and the foundation was back ordered. Maybe it's my bees telling me now's a good time to try foundationless! I need to add a 3rd brood box to a boomer hive like now and don't want to wait for more to be shipped from elsewhere. Can I add a box with starter strips or popsicle sticks to a hive that is already using foundation (duraglit in 1 box and plasticell in the other- normal cell size)? I have some super size plasticell I can slice down but seems popsicle sticks would be a lot easier. Do the bees have a major preference? Thanks to Mr. Bush for foundationless methods in his site. Oh, and would it help guide them to put sticks in the slots on the bottom of the frame too?
Thanks!
Tracy
I have different things in my hive, some plastic foundation that I have not transitioned out yet mixed in the starter strips. It doesnt matter at all.
When you place the starter strip super on top though be sure to have at least one frame of drawn out comb in the super right in the middle as a sort of reference point for them to start drawing out the comb straight. You do not need to use starter strips in the bottom frame. I don't think the bees care what you use as a starter strip. I use wax, but the main thing it is centered in the groove.
Good Luck
Annette
Quote from: annette on April 07, 2009, 01:49:25 AM
I have different things in my hive, some plastic foundation that I have not transitioned out yet mixed in the starter strips. It doesnt matter at all.
When you place the starter strip super on top though be sure to have at least one frame of drawn out comb in the super right in the middle as a sort of reference point for them to start drawing out the comb straight. You do not need to use starter strips in the bottom frame. I don't think the bees care what you use as a starter strip. I use wax, but the main thing it is centered in the groove.
Good Luck
Annette
Annette, when you say you use wax, do you mean wax foundation for the starter strip?
I use wax strips that I cut from foundation. I cut them about 2-3" wide and then fit them into the groove in the top bar. I heat up some wax and use a wax tube I bought from either Dadant or Walter Kelley (I cannot remember which) and use that to more or less weld the strip into the groove. The strip goes all the way across the top bar. My bees last season drew out a medium of natural cell with deeps of plastic beneath them. The first thing they did was draw drone comb right in the middle and then honey to the outsides.
I am going to just use the wedge bar from the frame in my hives that I am trying foundationless with. I have not done any yet but MB and others say it will work. So if you have wedge top bars just turn the wedge on edge and nail it in the center.
Quote from: tlynn on April 07, 2009, 08:49:38 AM
Quote from: annette on April 07, 2009, 01:49:25 AM
I have different things in my hive, some plastic foundation that I have not transitioned out yet mixed in the starter strips. It doesnt matter at all.
When you place the starter strip super on top though be sure to have at least one frame of drawn out comb in the super right in the middle as a sort of reference point for them to start drawing out the comb straight. You do not need to use starter strips in the bottom frame. I don't think the bees care what you use as a starter strip. I use wax, but the main thing it is centered in the groove.
Good Luck
Annette
Annette, when you say you use wax, do you mean wax foundation for the starter strip?
Yes as is mentioned by Pond Creek Farm, I also use the same system as he does. Check out this website by one of our members on how this is all done.
http://beekeeperlinda.blogspot.com/2007/04/how-to-use-wax-tube-fastener_26.html
Yes you can mix it up. Just don't alternate drawn comb and foundationless in the supers. Put the foundationless together and the drawn comb together. Otherwise they tend to build the drawn out really fat and ignore the foundationless making the frames impossible to remove.
I just had to cut out the comb from 4 frames like that. Yielded 4 1/2 pints of really nice amber this spring's honey. It was a little discouraging as the hive was building up very nicely but a beekeeper's gotta do what a beekeeper's gotta do. I split the hive while I was at it and should be able to coax another split out of my 2 overwintered hives again in May.
Quote from: Brian D. Bray on April 07, 2009, 11:25:02 PM
I just had to cut out the comb from 4 frames like that. Yielded 4 1/2 pints of really nice amber this spring's honey. It was a little discouraging as the hive was building up very nicely but a beekeeper's gotta do what a beekeeper's gotta do. I split the hive while I was at it and should be able to coax another split out of my 2 overwintered hives again in May.
Brian, huh? Are you saying that you already have honey this spring from your bees? That is most unbelievable. You pullin' our leg? Beautiful day in the great life, health. Cindi
Quote from: Cindi on April 08, 2009, 11:32:30 PM
Quote from: Brian D. Bray on April 07, 2009, 11:25:02 PM
I just had to cut out the comb from 4 frames like that. Yielded 4 1/2 pints of really nice amber this spring's honey. It was a little discouraging as the hive was building up very nicely but a beekeeper's gotta do what a beekeeper's gotta do. I split the hive while I was at it and should be able to coax another split out of my 2 overwintered hives again in May.
Brian, huh? Are you saying that you already have honey this spring from your bees? That is most unbelievable. You pullin' our leg? Beautiful day in the great life, health. Cindi
As Jack Parr used to say, when he was host of the Tonight Show....I kid you not.
Quote from: jdpro5010 on April 07, 2009, 10:55:02 AM
I am going to just use the wedge bar from the frame in my hives that I am trying foundationless with. I have not done any yet but MB and others say it will work. So if you have wedge top bars just turn the wedge on edge and nail it in the center.
I have wedge top bars too. This definitely seems to be the easiest method. Anybody think it's worthwhile to brush on a coat of wax on the strip?
>Anybody think it's worthwhile to brush on a coat of wax on the strip?
I don't. I think the bees attached it better if you don't.
Brian, you must be in a little tropical microclimate for the bees to be foraging so early, and making honey, you be that lucky soul, smiling. Yay!!! Have that beautiful, most wonderful of days, health. Cindi
Quote from: Michael Bush on April 10, 2009, 09:38:36 PM
>Anybody think it's worthwhile to brush on a coat of wax on the strip?
I don't. I think the bees attached it better if you don't.
OK, no wax it is. I'm putting them in tomorrow and will report back on progress in a week. Thanks all.
I'm pondering installing a couple of my packages foundationless. Anybody know exactly what i need to do? Do i need to put wire in the frames? Just curious to see how everybody is doing it.
I just use the foundationless frames with wax starter strips. I place at least one frame of already drawn out comb in the center of the super as a guide for the bees so they will draw out the combs nice and straight. So far I have done this twice and it worked both times. Tomorrow I am going to do it again, so lets hope it works a third time. I have heard that sometimes you get a bunch of bees that just make crazy comb.
Quote from: Cindi on April 10, 2009, 11:00:55 PM
Brian, you must be in a little tropical microclimate for the bees to be foraging so early, and making honey, you be that lucky soul, smiling. Yay!!! Have that beautiful, most wonderful of days, health. Cindi
Tropical microclimate = yesterday's high (the highest of the year to date) was a balmy 67 F and I got sunburned on the back of my hands and neck and my ears got burned as well. It is surprising what Russian bees can accomplish, forage wise, when the temps are in the mid 40's and above. I think I've logged my 1st ever 40 degree honey flow (Hazelnuts, Alder, Maple, Birch, and Dandelions).
Who would think of splitting a hive in Mid April with mid 40's to 50's temps with plans on doing a second split in another month, here in the PNW (aka The Rain Forest)?
Quote from: Brian D. Bray on April 11, 2009, 01:43:06 AM
Quote from: Cindi on April 10, 2009, 11:00:55 PM
Brian, you must be in a little tropical microclimate for the bees to be foraging so early, and making honey, you be that lucky soul, smiling. Yay!!! Have that beautiful, most wonderful of days, health. Cindi
Tropical microclimate = yesterday's high (the highest of the year to date) was a balmy 67 F and I got sunburned on the back of my hands and neck and my ears got burned as well. It is surprising what Russian bees can accomplish, forage wise, when the temps are in the mid 40's and above. I think I've logged my 1st ever 40 degree honey flow (Hazelnuts, Alder, Maple, Birch, and Dandelions).
Who would think of splitting a hive in Mid April with mid 40's to 50's temps with plans on doing a second split in another month, here in the PNW (aka The Rain Forest)?
I was in Seattle/Redmond/Monroe a couple summers ago, I think June, and it was in the 50s and rained just about every single hour. The morning I left it was sunny and 70. I had a window seat and after we took off you could see the Cascades, then the Olympics, the shimmering Pacific. I thought, man this place is SO beautiful!...glad I'm going back to FLA! :-D
I installed the new foundationless box on the bottom, so it now has the two other brood boxes above. I forgot to put a drawn frame in the middle of the new box. I guess I was getting a little preoccupied with how hot they were getting. Remember Pigpen in the Charlie Brown cartoons? All the flies circling around his head? That's what probably 20 bees were doing around my veil. These bees usually never ping. And I hadn't yet figured out how not to crush bees when taking the whole hive apart like that. They were just covering everything and at that point smoke wasn't moving them down...it was just making them spill out of the frames and get airborne. So my question is, given this picture, is it important enough to go tearing back into them to put the middle frame in or just leave them alone?
Oh and one more thing...the hives tilt slightly forward and are level from side to side. Could this be a problem with foundationless?
Perfect. Not a problem. Side to side is the issue.
Quote from: tlynn on April 11, 2009, 05:43:30 PM
Oh and one more thing...the hives tilt slightly forward and are level from side to side. Could this be a problem with foundationless?
With foundationless you'll find the bees to be a little more airborne than with foundation as opening the hive knocks a lot of the festooned bees free and with the open top they fly. Once they have a few partial frames of foundation drawn this is reduced a lot. The front to back slant won't bother anything but the side to side can make green comb bend and you can end up with a new frame of green comb being attached to a more mature frame of comb.
Quote from: hankdog1 on April 11, 2009, 12:26:54 AM
I'm pondering installing a couple of my packages foundationless. Anybody know exactly what i need to do? Do i need to put wire in the frames? Just curious to see how everybody is doing it.
I am doing foundationless too but I haven't tried the starter strips or popsicle sticks, so I can't comment on that.
I had some topbars made with the triangle cut into it all the way across and then I bought the end bars and solid bottom bars and assembled them.
They came out great.
I put them in the super with drawn foundation for them to use as guides.