Can any one help, Please.
An old beekeeper came by and suggested one of my hives maybe a bit hot (A large group of bees about 50 or so on front porch).
He suggested cracking open the top cover and then enclosing that area in mosquito netting.
I was wondering as to how actually I could fix this and allow me to open and inspect and at the same time allow a bit of air to run through the hive.
I have actually obtained some lolly pop sticks (following another thread here) to put at each corner of the top deep and the top cover to allow air through but not bees. I thought this was enough.
The current conditions are between 25 and 31 deg and quite dry and sometimes with a dry wind.
Thank you
Michael
bearding is normal when the temps get hot. my hives sit in 32 to 38 degree in the summer and they are fine. if it is hot, i do as you have done, and prop the top open just a bit. i do not think you need the netting. if the bees come and go through the top, it does not matter. the only time it would be a problem is if other bees are trying to rob that hive.
It is currently 39 C (103 F) here and my girls are fine.
Are you guys (and gals) using solid bottom boards or screened ones?
Mick
What about placing the inner cover on top (screened in of course) and then you can prop up the telescoping cover or any cover as you like. Why you could even place a few bricks on top of the inner cover and then place the top cover on top of that. Lots of good ventilation then. I just did that with a little nuc I had last week that had only a regular bottom board and I was worried about ventilation in this heat we had. It completely stopped the bearding.
I use the honeyrunapriaries ventilated top cover. No bearding at all.
And I use SBB all season long.
screened, but i put the insert in for winter.
SBB 8-)
Quote from: Michael Judd on July 10, 2009, 09:17:50 AM
Can any one help, Please.
An old beekeeper came by and suggested one of my hives maybe a bit hot (a large group of bees about 50 or so on front porch).
He suggested cracking open the top cover and then enclosing that area in mosquito netting.
I was wondering as to how actually I could fix this and allow me to open and inspect and at the same time allow a bit of air to run through the hive.
I have actually obtained some lolly pop sticks (following another thread here) to put at each corner of the top deep and the top cover to allow air through but not bees. I thought this was enough.
The current conditions are between 25 and 31 deg and quite dry and sometimes with a dry wind.
Thank you
Michael
Hi Michael, We have inter covers and we staple screen over the holes to keep beetles and robbers out,then we turn the outer covers sideways and lay two boards and a PC. of plywood on top for shade. If you don't screen the inter cover hole the guards can't keep beetles and robbers out.
Hi every one,
Thank you for your responses.
I think I was being a little alarmist - so sorry.
Of course the ambient temperature is not a problem but an amount of ventilation seems to be required.
However I did invert the metal top cover to allow more ventilation and this seems to be the answer ( I had already put V small pieces of wood between the deeps and also the top. My babies seem to be OK with this.
BTW I am using a solid bottom board. And I am looking into using a slatted one as well. I suppose the problem of installing it will be quite awesome.
It is also interesting to note that my old bee man (as in, retired - as he could not do wine and bees) who came to see me ( Actually he was delivering to me some supplies) said on that day "don't go into the hives today" as there was thundery activity in the area. I have read the threads on thunder and bees. But I found it interesting as that days thunder was a long way away in the mountains and was in no way in my area. So much so that we never heard a thunder clap. But it was heavy and cloudy in the distance.
Thank you all for you input
Michael
Here in Florida afternoon thunderstorms are a regular occurrence. The only time I won't work them is if the lightening is too close for my comfort. If there is much difference in the bees attitude, I haven't noticed it. I know that a drop in the barometric pressure is supposed to agitate them, but by that time the lightening is too close for me.
Quote from: Michael Judd on July 12, 2009, 04:54:12 AM
Hi every one,
Thank you for your responses.
I think I was being a little alarmist - so sorry.
Of course the ambient temperature is not a problem but an amount of ventilation seems to be required.
However I did invert the metal top cover to allow more ventilation and this seems to be the answer ( I had already put V small pieces of wood between the deeps and also the top. My babies seem to be OK with this.
BTW I am using a solid bottom board. And I am looking into using a slatted one as well. I suppose the problem of installing it will be quite awesome.
It is also interesting to note that my old bee man (as in, retired - as he could not do wine and bees) who came to see me ( Actually he was delivering to me some supplies) said on that day "don't go into the hives today" as there was thundery activity in the area. I have read the threads on thunder and bees. But I found it interesting as that days thunder was a long way away in the mountains and was in no way in my area. So much so that we never heard a thunder clap. But it was heavy and cloudy in the distance.
Thank you all for you input
Michael
Michael,Screened bottoms are very good for vent.I don't worry about my bees getting a little mean,i got good old girls to start with and they don't get very mean.
Michael I am using a slatted rack and a screened bottom board on all of my lang hives and it is working quite well for me.
We have had everything from weeks on end of rain to very humid conditions and then those random very hot days and the bees are coping with all of it very well.
I like the amount of ventilation the combination gives me as well as the extra space the slatted rack offers for the colony to cluster in as their numbers grow.
Its extremely simple to install, you just put the slatted rack on top of the screened bottom board, no issue at all.