Beemaster's International Beekeeping Forum

BEEKEEPING LEARNING CENTER => EQUIPMENT USAGE, EXPERIMENTATION, HIVE PLANS, CONSTRUCTION TIPS AND TOOLS => Topic started by: Barnabus on July 13, 2005, 07:11:54 PM

Title: Foundation making
Post by: Barnabus on July 13, 2005, 07:11:54 PM
Hi:
Does anyone know of any links that would show the process of making foundation?
What about links as to where one could purchase to equiptment to mold foundation.
Our county and the county below us are thinking about purchasing the equiptment thus allowing each beekeeper to have the opertunity to mold there own foundation and hopefully same save money.
Thanks:
Barney
Title: Foundation making
Post by: Michael Bush on July 13, 2005, 07:36:17 PM
http://www.beesource.com/pov/lusby/part14.htm
Title: Foundation making
Post by: bill on July 13, 2005, 11:18:07 PM
I was given enough foundation to last a long time but when the time comes, I was wondering if you could not just make a casting with plaster of paris. I think I saw something about a hinged box with molded plaster of paris both sides. seems like that would be simple enough. but nothing is ever as easy as ity seems when you try it.
Title: Foundation making
Post by: Michael Bush on July 13, 2005, 11:39:50 PM
I don't even like buying foundation, let alone, making it, installing it, wiring it etc.  I gave up and use all foundationless and the bees are healthier (no Varroa mites to speak of) and happier and I'm happier and work a lot less AND it's clean wax, small cell and costs me nothing.

I think all y'all work too hard.
Title: Foundation making
Post by: Robo on July 14, 2005, 09:47:45 AM
Quote from: billI was given enough foundation to last a long time but when the time comes, I was wondering if you could not just make a casting with plaster of paris. I think I saw something about a hinged box with molded plaster of paris both sides. seems like that would be simple enough.
"Keeping Bees" by John Vivian explains and shows the mold you describe.

Quote from: billbut nothing is ever as easy as ity seems when you try it.

You hit the nail on the head,  I messed with try to build one (actually 3 by the time I gave up).

Thanks to Michael's  insite, I think my foundation days may be over.
Title: Foundation making
Post by: mark on July 14, 2005, 06:17:23 PM
you can use tin snips and cut a 3/4" strip of foundation  for the bees to use as starter strip.  i pull the short piece of wire out after installation. the bees finish it nice to the size cells they want.
Title: Foundation making
Post by: Horns Pure Honey on July 15, 2005, 01:13:49 AM
The roller for making foundation cost over $1,000.00.
Title: Foundation making
Post by: Jerrymac on July 15, 2005, 03:43:02 AM
Quote from: markyou can use tin snips and cut a 3/4" strip of foundation  for the bees to use as starter strip.  i pull the short piece of wire out after installation. the bees finish it nice to the size cells they want.

I use a pizza cutter. NOTE: No wires in my foundation either.
Title: Foundation making
Post by: Michael Bush on July 15, 2005, 10:48:19 AM
If you go to a fabric store you can buy a rotary cutter for making quites the REALLY works nice, but I just use the pizza cutter also.  Or a pair of sharp scissors.
Title: Foundation making
Post by: Jon McFadden on July 15, 2005, 09:47:35 PM
Michael,
Thanks for posting the link to the foundation article.
I wondered how the foundation blanks could be made quickly. I just wish the rolling mill weren't so expensive.
Title: Foundation making
Post by: Michael Bush on July 16, 2005, 02:54:21 PM
I'm sure Dadant and the rest have a mass production method for making blank rolls of wax.  Probably Hawley makes them (in Iola KS and has ads in every bee journal for the last few decades).  But you can make them pretty quickly.  I use a one by six (to make mediums) and just cut several the length I want the foundation and the one by six is already the right width.  Then I soak them in brine and dip them.  By the time I've dipped the last one, the first is ready to take off of the wood.  You can actually do a lot pretty quickly once you get a system going.