I've been using hard inner covers (Crown Boards) for years, and am now thinking of changing over to soft inner covers (thick plastic sheet, feed sacks etc) - as it's one less bit of woodware to make.
At the moment I'm trialling just the one hive with a plastic sheet - which lies flush on the bars, as that hive is bottom bee-space. It's looking good so far, although I'll be happier when some propolis is attached, as at the moment when the roof is off, the plastic sheet slides around a bit and flaps if there's any breeze unless there are weights on it.
What's the story when using such materials with top bee-space boxes, as there'll then be some 'droop' between box side and top bars ? And, does anyone have any tips or tricks when using such materials ?
LJ
Just use them. They will rest on the top bars and be propolized. Peel them back when you want to get into the hive.
Thanks Michael - yes, I'll do just that.
As regard to suitable materials for 'soft' inner covers - perhaps the 'greenest' I've yet found are old, worn-out yachting sails. These are invariably made from polyester (Dacron, Terylene) with a resin coating on both sides, although some now include Mylar and Kevlar in their construction.
Yachties have a big disposal problem with old or damaged sails as it's usually not economical to repair or re-cut them, and the material is generally not considered suitable for re-cycling. Although a few are turned into rather weird shopping bags from time to time, the vast majority end up either being burnt (with some difficulty) or go straight into landfill.
So - re-cycle old freebie sails for beekeeping use - a win-win for all concerned. :smile:
LJ
Canvas works. Old plastic "burlap" feed (not seed) bags work.