I have a question on an old modem. I was given an older external "SUPRAEXPRESS 56 sp modem sup 2050" because I was looking for a modem which was not a "Winmodem" to use with SLACKWARE LINUX.
Most modems plug into a 9 pin serial port, but this one has a 25 pin female connection. Is it for a parallel port? I have been having trouble connecting with my ISP dialup, and they are quite unhelpful, aparrently thinking that I am trying to "hack" their system. Sometimes adapted to a serial port I can recieve but not send
Any advice would be greatly appreciated.
Ayyon 2157
Use a chat client (xchat, chatzilla, irrsi, etc)
join irc.oftc.net
join #linuxhelp
Post your question and be patient
.
Sincerely,
Brendhan
The early serial ports were 25 pin, but of the opposite gender to the parallel connector. There are 25 to 9 pin adapters, take a look at the ATSCA and PCSCA adapters on this page -
http://www.altex.com/index.php?cPath=3_13_111
Serial ports are 25 pin. Actually, only 9 are used, so its not a problem getting an adaptor. Many times, the cables are not the right ones. I have seen, over the years, cables that apear to be correct, plug right in, and will not work. The reason is, most of the times there is a crossover. IE, what is a send on one side, must be a recieve on the other.
Modem drivers also must be correct. Sometimes drivers are not universal.
I am not a linix expert, but I would look into drivers and the cable. If it is not the original cable that is where I would start.
Also, your ISP probably is not familiar with that type of modem, hence thats why they are not helpful.