Hi,
I have 4 hives and have been happy using a large bread knife to deal with my cappings for a couple of years but this extraction we just did (110kg)I have decided we need a good knife to uncap.
Can anyone recommend a good knife I was looking at these 2
http://www.ebay.com.au/itm/Beekeeping-Electric-Honey-Uncapping-Knife-240-volt-Made-in-USA-Speed-King-/111757524047?hash=item1a05447c4f:g:8AcAAOxy9eVRVmyg
https://www.penders.net.au/knives/uncapping-knife-electric-detail.html
Is the Speed King worth the extra $ ??
Thanks
I bought a copy of that first electric knife off Flea Bay for around $50 only 3 weeks ago and it works fine.It came from a Aussie supplier too.
Cheers
Steve
I have (had) a 12volt electric - got cold half way down a frame - borrowed a friends 240volt electric - not much better
Bought an old steam knife off eBay - BEAUTIFUL ! like a hot knife through butter - also longer and overhangs both sides nicely. Only drawback is the weight of the steam lines dragging.
Thinking of modifying to add another handle so will use two hands with the frame laying in a sloping holder - have been trying with some improvisation and shows a lot of promise for quicker and easier uncapping.
hey wombat look to the sheep shearing sheds for ideas a spring or weighted hanger for your knife so you uncap then let the knife go and it hangs in a convenient spot ready to go again that way weight of the knife don't matter
Recurve,
Have you used a non electric decapping knife?
I and my wife use one and I like it a lot better. The electric ones end up getting to hot when they sit and cook the honey on them, changing the flavor of the honey. I used one the first time I extracted, it belonged to the guy that had an extractor, and never used one since.
Jim
Thanks for the replies, I am still not sure which way to go steam/electric or stay with non electric.
Quote from: sawdstmakr on October 30, 2015, 12:30:36 PM
Recurve,
Have you used a non electric decapping knife?
I and my wife use one and I like it a lot better. The electric ones end up getting to hot when they sit and cook the honey on them, changing the flavor of the honey. I used one the first time I extracted, it belonged to the guy that had an extractor, and never used one since.
Jim
I use a large bread knife at the moment and it has done me well so far with avg extractions of 20-30Kg at a time when we had 2 hives. Now we have 4 and there must have been a good flow on we got over 110Kg and we where only half way thru spring. I was thinking it may be worthwhile investing in a good knife. I suffer with arthritis in wrists and ankles so if a hot knife/steam would help without effecting the honey I would jump at it.
It is either that or I may need to decrease the amount of hives.
The best knife for uncapping that I have found ever was by accident. The mother-n-law was using a electric knife at Thanksgiving and it died. She was throwing it away and she asked if I wanted the blades and they were still sharp. I put a plastic handle on each blade and with the thin curef of the blades it slices clean thru the cappings without reading and sticking. I have never gone back to the reg capping knife or heated knife scence. Have been using the same knives for six years. And I can uncap frames faster and easier than my friend can when we uncap hundreds of frames together.
John
I like the pant roller works good for me an less mess puts the little holes in it nice
We use the roller as a touch up after we use the knife.
Jim
I used to have an electric knife but now use two non-electric knives with a pot of near boiling water on a burner. I switch knives when one cools. It as just as fast but I too am in the market for another electric one.
Ed,
That sounds like a good idea. I will try it the next time we remove honey. It probably works better than the electric knife because it does not over heat.
Jim
Thanks for the help all.
I have decided to do what ED does so I purchased another cold knife and will rotate between them
Quote from: Recurve on October 25, 2015, 01:14:14 PM
Hi,
I have 4 hives and have been happy using a large bread knife to deal with my cappings for a couple of years but this extraction we just did (110kg)I have decided we need a good knife to uncap.
Can anyone recommend a good knife I was looking at these 2
http://www.ebay.com.au/itm/Beekeeping-Electric-Honey-Uncapping-Knife-240-volt-Made-in-USA-Speed-King-/111757524047?hash=item1a05447c4f:g:8AcAAOxy9eVRVmyg
Yes, it is. We sell them for $ 180. Cheapest you can get for the US made one.
https://www.penders.net.au/knives/uncapping-knife-electric-detail.html
Is the Speed King worth the extra $ ??
Thanks
Not sure why you would pay over $100 when you can get one for less than $30 (free shipping if prime) at Amazon. Regular is $99. http://www.amazon.com
/Electric-Honey-Extractor-Uncrapping-Beekeeping/dp/B00VF8G9OC/ref=cm_cr_pr_product_top?ie=UTF8
I had never used a cappings scratcher and wanted to try, so I took a good quality table fork from a steak knife set and tried scratching the cappings. Wow, it worked really well! I could scratch the cappings off a comb about as fast or faster than using the steam knife. I might make a few different size scratchers :smile:
Over the years I have used many types of knives. Most work well with practice. My electric knife worked the fastest and cleanest. I turn the knife off if I need to wait to use it again (get to far ahead of the extractor) then back on. I have not had a problem with the knife burning the honey (mine has a thermostat on it) only me when I get careless, but not cuts :wink:) -Mike
Quote from: sawdstmakr on November 12, 2015, 12:48:58 PM
Ed,
That sounds like a good idea. I will try it the next time we remove honey. It probably works better than the electric knife because it does not over heat.
Jim
I thought that was what everybody did?
Quote from: Richard M on February 29, 2016, 06:42:41 PM
Quote from: sawdstmakr on November 12, 2015, 12:48:58 PM
Ed,
That sounds like a good idea. I will try it the next time we remove honey. It probably works better than the electric knife because it does not over heat.
Jim
I thought that was what everybody did?
Nope, we have been using cold knives for years now. They do work pretty well cold.
Jim
If I was buying one right now, I'd get an electric plane.
I did some more extracting recently. With three of us working we found the bottleneck was the 2 frame hand extractor.
We used both the kitchen fork and the steam knife because the new people wanted to try the steam knife - I was again very impressed with how well the fork worked.