Text only | Text with Images

Beemaster's International Beekeeping Forum

BEEKEEPING LEARNING CENTER => EQUIPMENT USAGE, EXPERIMENTATION, HIVE PLANS, CONSTRUCTION TIPS AND TOOLS => Topic started by: Ben Framed on April 30, 2021, 10:15:09 AM

Title: Jeff Horchot Method of Coating Plastic Foundation
Post by: Ben Framed on April 30, 2021, 10:15:09 AM
https://youtu.be/ijEIsxVlLhw
Title: Re: Jeff Horchot Method of Coating Plastic Foundation
Post by: BeeMaster2 on April 30, 2021, 09:26:10 PM
Ben,
I made a dipping chamber from 2-4 inch pieces of 4x4 1/4? thick steel tubing. I cut out the one side of each one and welded them together and welded on a bottom plate. I put them over a propane flame. It is tall enough to shake off the excess wax back into the tank. 
Jim Altmiller
Title: Re: Jeff Horchot Method of Coating Plastic Foundation
Post by: Ben Framed on April 30, 2021, 11:59:38 PM
Quote from: sawdstmakr on April 30, 2021, 09:26:10 PM
Ben,
I made a dipping chamber from 2-4 inch pieces of 4x4 1/4? thick steel tubing. I cut out the one side of each one and welded them together and welded on a bottom plate. I put them over a propane flame. It is tall enough to shake off the excess wax back into the tank. 
Jim Altmiller

Yes, that sounds good Jim. It worked out well? Do you have a way to determine the temperature so that it does not reach to high?
Text only | Text with Images