Beemaster's International Beekeeping Forum

BEEKEEPING LEARNING CENTER => GENERAL BEEKEEPING - MAIN POSTING FORUM. => Topic started by: jgarzasr on December 14, 2006, 02:29:57 PM

Title: Beeswax weight
Post by: jgarzasr on December 14, 2006, 02:29:57 PM
I know this is an off topic.  But I plan on using some of my beeswax to make some homeade gifts.  The recipes call for Beeswax in ounces.  Can anyone tell me what the conversion would be to say... cups.  So like how many cups/tsp/TBS of beeswax in an OZ.  Thanks.
Title: Re: Beeswax weight
Post by: Kathyp on December 14, 2006, 04:09:32 PM
no, but it should be pretty easy to weigh chunks of wax and then melt and measure it.  you'd have to do it a bit at a time, but i think you could get pretty close to an accurate measurement.  you'd only have to do something like 1/4 cup.
Title: Re: Beeswax weight
Post by: mick on December 15, 2006, 02:26:37 AM
Hello my name is Chef Mick. A "cup" is usually 250ml or umm 250gm which is umm 250/27 call it 8-10 ounces per cup. A TBS I think is 8 teaspoons, a teaspoon is 5gms so 40gms to the TBS, call it just over an ounce to the TBS and you will be pretty close.
Title: Re: Beeswax weight
Post by: AndersMNelson on December 15, 2006, 02:38:15 AM
Could you write out the conversion factors and stuff?  I don't remember them...
Title: Re: Beeswax weight
Post by: mick on December 15, 2006, 03:23:29 AM
Im not sure what you are asking, but this site might be helpful.
http://convert.french-property.co.uk/
Title: Re: Beeswax weight
Post by: Cindi on December 15, 2006, 10:53:16 AM
Just a quick re-cap, don't know all that much about measurements, etc., but do know a little.  I know that the specific gravity of honey is 1.5, water of course is 1.0.  When I used to measure fertilizers in my greenhouse for the seedlings, it would always call for grams.  Now I have a problem with measuring things by weight everytime I wanted to do something.  So I initially found out the weight of different chemicals.  It was surprising how many have different weights per volume.  It became very confusing, but finally I got it down pat.  But I had to indicate on different packages of chemicals what the volume by weight was.  It helped and they were all slightly different.

So getting to the point of weight per volume, you have to figure out the "weight" of the wax first, then the volume it takes up.  Keep a permanent record then you will never have to recalculate.  Hope something I said made sense.  Or go to the sites that were listed in previous posts, it probably has a real simple way there.  Great day. Cindi
Title: Re: Beeswax weight
Post by: Michael Bush on December 15, 2006, 03:40:25 PM
A pint of beeswax weighs SLIGHTLY less than a pound.  So a cup weighs slightly less than 1/2 pound.

"A pint's a pound the world around." works for water, beeswax, motor oil, gear lube, sugar...