Anyone ever see any of these?
(http://beevac.com/photos/albums/userpics/10001/SlideOutBroodChamber.jpg)
Ihave never seen one ,but at that price I'll take a bunch!! :-D
Does it come in mediums?
It only came in deeps. I stumbled across it in the 1964 Root catalog. I never seen or heard of it, so was just wondering if anyone has. Obviously it didn't work to well since it didn't seem to last too long on the market.
It is nice to know that stuff like that is out there.
I was talking with my wife the other day about a side open door on the hives.
I wasn't sure if one had been invented before or not.
I had mentioned to her how Michael(Bush) and Brian(D Bray) like the eight frame hives.
Iwas thinking of using that as my template. the reason I figure for Brian it would be much easier to inspect the hives that way. No having to lift hive boxes for an inspection. Michael wouldn't have the back pain issues either.
So I started a CAD drawing. I haven't finished it yet. And I don't like submitting drawings without a real world try of the device. My design is slightly different than the image. I thought about the slide out tray but I figured propolis and burr comb could jam it up.
So I went with a slide rod design. The frames would have sleeves that let them slip over the rod. So if burr comb was issue you were only dealing with it on a frame by frame basis. It is much easier to break burr comb on a frame then all ten frames at once.
The issue I am confronting in my design is I want to make sure the rods can hold 6lbs/2.7 KG(approx weight of a medium loaded frame with bees on it) when the side cover is off without bending or bowing. Having a rod support the weight while the side cover was on is no problem but when you remove the cover you don't need the rods to bow down. The other thing is I don't want the rods to be any larger than they have to.
So I am thinking of doing a T design on one side that would give it reinforcement. However I am probably going to change it 6 more times beore I settle on something.
Sincerely,
Brendhan
Here is another no-lift design. I have seen pictures of such a device before, but never in person. I guess the advantage to this is that it works with standard equipment so no need to replace all your supers. I guess the disadvantage is that it does take time to set up at each hive, but then again, if you can't lift I assume you won't be going thru 100s of hives a day anyway.
(http://img70.imageshack.us/img70/5771/superliftsc4.th.jpg) (http://img70.imageshack.us/my.php?image=superliftsc4.jpg)
It's hard to tell what keeps that from falling over...
It is hard to tell from the picture, but it looks to me like there are two support legs in a v-shape that go to the ground under the suspended supers.
Hmm,
A little paint,duct tape,filing cabinet........,Red Green, help me out.Maybe an outboard engine and prop for hive ventilation! :-D
Actually it's interesting to see ideas to overcome a particular problem.Maybe something like a small slide out screen between the supers or a groove to push a slicer through t cut the burr comb before sliding the frames out.
Quote from: Understudy on April 06, 2007, 11:13:34 AM
It is nice to know that stuff like that is out there.
So I started a CAD drawing. I haven't finished it yet. And I don't like submitting drawings without a real world try of the device. My design is slightly different than the image. I thought about the slide out tray but I figured propolis and burr comb could jam it up.
So I went with a slide rod design. The frames would have sleeves that let them slip over the rod. So if burr comb was issue you were only dealing with it on a frame by frame basis. It is much easier to break burr comb on a frame then all ten frames at once.
The issue I am confronting in my design is I want to make sure the rods can hold 6lbs/2.7 KG(approx weight of a medium loaded frame with bees on it) when the side cover is off without bending or bowing. Having a rod support the weight while the side cover was on is no problem but when you remove the cover you don't need the rods to bow down. The other thing is I don't want the rods to be any larger than they have to.
So I am thinking of doing a T design on one side that would give it reinforcement. However I am probably going to change it 6 more times beore I settle on something.
Sincerely,
Brendhan
Would be interested in seeing your design, looks like from picture that the premise of it all was the frame rests were reinforced and built like drawer slides, the only drawback I see with picture model is removal of side piece to make them where they will slide through. But otherwise a good idea. Building a few supers now might try to incorporate one with some heavy duty drawer slides. Can't hurt to try something new that is old, like they say " nothing new in the universe". :-X :-\
Brendhan, your endeavour will be cool and wonder if ya can get it designed and trialed. Good for you. Have a wonderful day with good health. Cindi
Brendhan,
Try the idea of shaving the top and end bars and using 1/4 inch aluminum U shaped (channel) wings on the bars. The grooves could then be supported by metal rods positioned on each side of each frame.
Quote from: Brian D. Bray on April 07, 2007, 10:48:07 PM
Brendhan,
Try the idea of shaving the top and end bars and using 1/4 inch aluminum U shaped (channel) wings on the bars. The grooves could then be supported by metal rods positioned on each side of each frame.
Already had planned on end tabs. However I want a way to be able to handle the frame from the sides without risk of slipping or dropping. I have planned on changing the the tab design slightly. I will be up in Atlanta next week. I should be able to complete the design on paper by then and then I will do the first CAD prototype. After that I will build my first one. Then I will find what I like about it and what I don't. I will go back and change the CAD and build the next one or correct the first one if they are minor.
I have a few strict ideas in my head I want to keep as a standard.
1. The box must be have the same perimeter so it will fit with other 8 frame mediums and still work.
2. It must use simple parts. You should be able to pick up and build one of these with items readily avaliable from a hardware store. If something breaks it should be easily repairable.
3. It can't cost a fortune.
4. While the design may be a bit more elaborate it must be simple to assemble.
5. While the frames may not work from a side open hive into a standard hive. I want to be able to convert standard frame to a side frame with a minimal amount of effort.
I have a few more not so strict desires that may change as it goes along.
Sincerely,
Brendhan
Brendhan, work hard, keep up updated, sounds great. Best of the day, good health. Cindi
Hey,
There were some pictures on here a while back of Slovak hives that had the same concept of slide out frames. I liked the idea, and cached the images. Can't remember the name that posted them...really neat though. That way a whole wall of hives could be placed in a building.
So what happened to the design? Any good, any bad?
Somewhat not so interesting story.
I designed one and started testing it out. The problem was that in order to maintain the same dimensions and maintain the load bearing capabilities. It wouldn't work. I either had to alter the dimensions or the structure. The design that was originally posted was like a slide out drawer. I tried one. Everything and it's brother would cause it to jam. After doing one or two more alterations that did not succeed for one reason or another to my exacting standards I let it die. It rattles in the back of my mind every now and then. And once in a while inspiration hits me. Then I realize God has a sense of humor and likes to laugh at me and my antics. I may have to enter into a pact with Satan to come up with one that meets my picky standards but in the meantime I just let in burn in the in back of my mind.
Sincerely,
Brendhan
Hi everybody,
They have something like this for sale on ebay - search beekeeping it comes up for sale for $95. sorry I can't post a url here.
Thanks
And a big Hello to you. :-D
Quote from: Balhanapi on January 17, 2009, 01:31:11 PM
Hi everybody,
They have something like this for sale on ebay - search beekeeping it comes up for sale for $95. sorry I can't post a url here.
Thanks
Yes, that is what bought this thread back to life.
http://forum.beemaster.com/index.php/topic,19270.0.html
Welcome to the forum. Please introduce yourself in the greetings forum and update your profile with your location when you get a chance. :-D