outer cover aluminum

Started by randydrivesabus, December 01, 2007, 12:46:20 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 All
User actions

BarneyG

#20
January 18, 2008, 03:23:26 PM
Hello  All    i use the poor man way   i get the alumnum print sheets from the news paper printing press about 20  sheets only cost $4.00 here  and they work great  !    Barney
Barney

annette

#21
January 19, 2008, 01:31:47 AM
I'm with you Cindi on this one. I am totally helpless in the building arena. That is why I have to purchase everything assembled. 

Annette

gwalker314

#22
April 12, 2009, 04:22:45 PM
I know this is an older thread but I couldn't find one that addressed gluing the aluminum cover. What if any adheasive is used to glue the top? I know the ends and sides would be stapled or nailed.

Thanks,

GW

asprince

#23
April 12, 2009, 07:16:57 PM
No glue is needed if you staple the edges.

Steve
Politics is supposed to be the second oldest profession. I have come to realize that it bears a very close resembalance to the first. - Ronald Reagan

contactme_11

#24
April 12, 2009, 08:18:00 PM
Quote from: randydrivesabus on December 01, 2007, 06:05:45 PM
so how would you use that to fold something 20" long? fold once then slide it down to fold again? 


Cut the metal with good long tin snips fold with one of these:
http://www.amazon.com/Malco-24F-24-Inch-Folding-Tool/dp/B00028954M/ref=sr_1_2?ie=UTF8&s=hi&qid=1239578149&sr=1-2

Did I mention I do sheetmetal fabrication for a living?
								

							

							

								
    
								

							

						

						

						

					

				

				

			

		

		

			
		

			
				Print
		

			 
			

				Go Up
				Pages 1 2 All 
			

		

			User actions