Hive top cover question

Started by backyard warrior, November 29, 2010, 06:17:03 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

backyard warrior

I am hearing from some to tip the outer cover with a stick to get the condensation to run to the front. Then others tell me to use foam on the outer cover and a top vent. Would it be best to tip the whole hive so the water runs to the front then put foam under the outer cover .  Im all ears :P

Culley

My hives are tipped forward. In my limited experience, top ventilation helps alot with moisture in the top of the hive.

riverrat

i put popsicle sticks or a penny under each corner of the inner cover that will give the hive plenty of ventilation
never take the top off a hive on a day that you wouldn't want the roof taken off your house

Hemlock

I had condensation problems before.  Then I tipped the hives forward slightly & insulated the beneath the telescoping cover.  I also added a shim between the Inner cover & the telescoping cover with a screened 1 inch hole in it to vent any excess moisture.

-The insulation keeps warm & humid bee breath from condensing on the underside of the telescoping cover
-The tilt forward allows any condensation to flow toward the front wall of the hive and not drip down on the cluster in the middle.
***there is always condensation in a winter hive***
-Again, the small vent hole helps reduce the amount of moisture inside.


Vent Shim before insulation





Vent Shim insulated






The Telescoping cover goes on top of this



Make Mead!

Finski

.
If you have screen bottom, you need not upper ventilation

do not ventilated air inside the gap of inner cover and rain cover.
That is worst you can do.

If you need upper ventilation, make a finger size hole in front wall. Round shape is the best.

If the inner cover has moisture because of condensation, add insulation.
Condensation happens on coldest surfaces.

I have here now -20C and condensation of respiration moisture will happen inside the hive and there are more or less snow inside. When the weather turns milder, the snow inside will melt and drop onto bottom. Nothing happens to bees.

One thing more: before wintering deminish the wintering room to minimum. So the hive box is warmer and that changes the relative moisture better to bees.
Of course, the heat is friend of bees.

.
Language barrier NOT included