Blank Monitor

Started by sean, March 22, 2009, 05:10:34 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

sean

March 22, 2009, 05:10:34 PM
Hi, my monitor is giving me this message "No signal recieved" any tips on what the problem might be. I know the monitor is ok so the problem might lie with the cpu

vermmy35

#1
March 22, 2009, 06:31:57 PM
did you put in a new video card if so make sure you have the extra power cable plugged into the card
next I would see if the hard drive is working to try and rule that out
Semper Fi to all my brothers out there
http://gettingbacktocountryliving.blogspot.com/

buzzbee

#2
March 22, 2009, 06:33:12 PM
Could be a bad monitor cable or a video card problem.Make sure the cable is screwed tightto the back of the computer. If it is just plugged in you could have a bad connection.

sean

#3
March 22, 2009, 10:22:24 PM
no new video card and i've tried it with 2 diferent monitors with their own cables. Guess it's to the shop i go

eri

#4
March 23, 2009, 07:34:33 AM
Unplug the computer, open the cover, and reseat the video card (pull it out a bit, then make sure it fits snugly in its slot). If dusty, blow it out with compressed air. Someone brought me a computer just last week with the exact same symptom description (they had tried 2 monitors) and it turned out to be a loose video card. If that doesn't work and you can hear the hard drive whirring, I'd suspect the video card has gone bad, which can happen without warning.

Good luck.
On Pleasure
Kahlil Gibran
....
And to both, bee and flower, the giving and the receiving of pleasure is a need and an ecstasy.
People of Orphalese, be in your pleasures like the flowers and the bees.

sean

#5
March 23, 2009, 11:30:26 AM
ok thanks will try that
Print
Go Up Pages1
User actions