Where to get the metal for hive top covers???

Started by Fishing-Nut, August 11, 2019, 09:37:59 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Fishing-Nut

Lowes didnt have anything anywhere near wide enough. Not that I could find anyway. 
Take a kid fishing !

Troutdog

24 inch coil stock

Sent from my SM-G965U using Tapatalk


FloridaGardener

Dadant sells the crimped-edge metal top for $10 in-store, but I don't see it on their website.  Maybe it you can call?  It's slightly telescoping but not a huge overhang.  It goes over woodware you build yourself.

Sputnik

I bought a 20 inch x 50 foot roll of aluminium flashing. I got it at Lowes. It bends easily. I cut it to size and clamped it between 2 1x4 boards to form my bends.

iddee

Lowe's sells a 24 in. flashing. You only have to cut it to width. Ask them to order it if not in stock. A saw kerf, slightly angled, in a 2X4 makes a good bender.
"Listen to the mustn'ts, child. Listen to the don'ts. Listen to the shouldn'ts, the impossibles, the won'ts. Listen to the never haves, then listen close to me . . . Anything can happen, child. Anything can be"

*Shel Silverstein*

Dallasbeek

For wider metal flashing, try a roofing company.
"Liberty lives in the hearts of men and women; when it dies there, no constitution, no laws, no court can save it." - Judge Learned Hand, 1944

jalentour

Lowe's sells a 24 in. flashing. You only have to cut it to width. Ask them to order it if not in stock. A saw kerf, slightly angled, in a 2X4 makes a good bender.

I cut my kerf at 45 degrees, about a 3/4 inch blade length.  Score the sheet with a razor knife and bend, Tin snips to cut corners.  Staples to attach the top, use more than a few. 
Watch out for sharp edges.

BeeMaster2

Fishing nut,
Did you look in the roofing section. That is where I find it in our Lowe?s.
Jim Altmiller
Democracy is 2 wolves and a lamb voting on what to have for lunch. Liberty is a well armed lamb contesting the vote.
Ben Franklin

Fishing-Nut

I did look in roofing.  I forget the exact size they had but it was 12 inch I think.  Nothing big enough. I'll look again though because I go to lowes several times a week for work.
Take a kid fishing !

iddee

"Listen to the mustn'ts, child. Listen to the don'ts. Listen to the shouldn'ts, the impossibles, the won'ts. Listen to the never haves, then listen close to me . . . Anything can happen, child. Anything can be"

*Shel Silverstein*

Fishing-Nut

I did ASK...right after i looked.....the guy said that what was over there was all they had. I go to lowes for building materials for work...maybe when I go in there with a little more time on my hands I'll do some more digging and ASK someone else.
Take a kid fishing !

cao

I don't know if Lowes carries it in the store.  According to there web site, I would have to order it from my local store.  They only carry it in 10" wide in the store.  I don't shop Lowes much anymore.  I usually go to Menard's.  They have 24" wide x 50' in stock.