Feed bees in a Top Bar hive

Started by Anny, May 06, 2009, 07:53:03 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Anny

Hello, I'm new I'm getting my bees very very soon. I was wondering what is the best way to feed bee in a top bar hive?

Do you have any photos of what you use to feed your bees?

Can I just use a mason jar with syrup in it, with beads or hay on top to prevent lost bees from falling in?

mtbe

Initially, I used the baggie feeder method.

Pour a baggie (sandwich size ziplock) about 2/3 - 3/4 full of syrup.

Place baggie flat on the bottom of the hive.

With sharp knife, make a couple of slits in the top, but not near the edges. 

Another option is to make a few pin holes (wiggle the pin a bit to enlarge the hole) on one side of the baggie first, then lay it flat on the bottom of the hive.  You will get a few spurts of liquid, but it makes for a quicker entry and exit.

After doing this most of the spring, I change to a standard entrance feeder, BUT, I put the feeder inside the hive on the follower board.

Depending on where you are, you may not need to feed your bees for very long.  In Northern Illinois, they are not taking my syrup anymore.

Natalie

Anny,
          The baggie is a good way to go for topbar hives or you can use an entrance feeder that you see in the catalogs behind a follower board inside the hive.
Do not put it in the entrance of the hive like the catalogs say because you can get a robbing situation on your hands.
If you just cut a groove out of the follower board and place the entrance feeder behind it with just the front sticking through to the hive its easy to remove if they stop feeding due to a nectar flow.
The baggies are great but are messy to remove if they are still somewhat full and the bees are no longer taking syrup.
If you think you are going to need to feed for a while then the baggies are fine but if you are unsure I would use the boardman (entrance Feeder).
I suggested it to someone the other day and its worked out fine for them too.

Highlandsfreedom

I was wondering...... on my langstrum hive I feed mega bee on the top of the frames, how could I feed them in a top bar hive I think I will make that my next colony's home. 
Dave
To bee or not to bee that is the question I wake up to answer that every morning...

Natalie

I don't use the patties but I would guess would lay them on the floor of the hive like you would when you are using the baggie feeding method.

Robo

Here's the feeder I used for my TBH. It replaced 3 or 4  top bars.   I built mine with a screened divider in the middle so it was a common feeder for two small nuc colonies on either end of the hive.



It had a screened fill tube so I could fill it without opening the hive, and a 1/4 hole that I used a dowel as a dipstick to see the syrup level





I successfully wintered 4 nucs (2 in each hive) using these feeders

"Opportunity is missed by most people because it comes dressed in overalls and looks like work." - Thomas Edison



Highlandsfreedom

Those are great!! I always like to see pics. of how things work. Thank you!!!
To bee or not to bee that is the question I wake up to answer that every morning...

snmyork

Robo,

Do you have the plans for that feeder? I have a TBH and wondered about that for the winter.

Robo

No plans,  just built it to fit snug inside my TBH so that it also acted as a divider so I could keep 2 colonies in it.   I put a row of 3/4" holes along the top on each side and a piece of screen down the middle to keep the two colonies separated.  I also added some wine corks as floats.   If you only use it as a feeder, and not a colony separator than it doesn't need to fit snug nor do you need the screen inside.
"Opportunity is missed by most people because it comes dressed in overalls and looks like work." - Thomas Edison



beedad

Quote from: Anny on May 06, 2009, 07:53:03 AM
Hello, I'm new I'm getting my bees very very soon. I was wondering what is the best way to feed bee in a top bar hive?

Do you have any photos of what you use to feed your bees?

Can I just use a mason jar with syrup in it, with beads or hay on top to prevent lost bees from falling in?

i recommend stapling a baggie to the bottom of a top bar with a pin hole or two, that way when you want to change it out you dont need to disturb the bees so much while they're getting settled.

Michael Bush

If you do the baggie, install the bees first or they will land on the baggie full of syrup and many bees will drown.
My website:  bushfarms.com/bees.htm en espanol: bushfarms.com/es_bees.htm  auf deutsche: bushfarms.com/de_bees.htm  em portugues:  bushfarms.com/pt_bees.htm
My book:  ThePracticalBeekeeper.com
-------------------
"Everything works if you let it."--James "Big Boy" Medlin

Natalie

So Micahel, how is it that you know this? ;)

mtbe

Robo,

How do you seal the wood so that it doesn't soak up the syrup, and or leak?

mtbe

Robo

#13
Quote from: mtbe on May 11, 2009, 10:07:23 AM
Robo,

How do you seal the wood so that it doesn't soak up the syrup, and or leak?

mtbe

Water based polyurethane and then I melt bees wax and run it along the seams.
"Opportunity is missed by most people because it comes dressed in overalls and looks like work." - Thomas Edison



dragonfly

I built a top bar hive 6 years ago, and will building another one in the next couple of weeks. I cut a slot in the wood on the end opposite the entrance (to help control robbing), placed a shelf with L brackets, and used a standard jar feeder. It worked well for me.