Harbor Freight Nail/Staple Gun

Two Bees · January 23, 2010, 11:04:45 PM

Hey! As a couple of beeks have recommended, the HF Combo Nail/Staple Model 97524 is on sale!

Only $19.99 plus tax!

http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=97524

trapperbob · January 24, 2010, 01:00:06 AM

destroyed one of these last season while putting together 20 medium supers and 6 deeps went to home depot and bought a better one.

Two Bees · January 24, 2010, 09:14:30 AM

That's good to know! I'll keep my receipt for the return! But for $20 bucks, I'll risk it!

Thanks for the feedback.

asprince · January 24, 2010, 11:04:22 AM

I have had one for some time and it works great, but now I am trying to wean myself from Chinese products no matter how good of a deal.
I am struggling because we import so much.

Steve

manfre · January 25, 2010, 07:04:49 PM

One of these was given to me as a gift. It jammed horribly the first time I pulled the trigger. Had to disassemble part of it to clear the jam only to have it jam on the next brad.

Kathyp · January 25, 2010, 09:43:26 PM

i have one from HF and it's fine. have another that i'm sure was more expensive...was given to me and i don't see a difference...yet :-) i have been using my HF gun for a couple of years.

Two Bees · January 25, 2010, 10:47:38 PM

This gun shoots up to 1.5" crown staples or 2" nails. What were you guys shooting when you had your problems with the gun?

manfre · January 26, 2010, 01:56:24 AM

It jammed on 2" brads while I was assembling supers.

jdpro5010 · January 28, 2010, 03:40:50 PM

I just bought my second one . The first one worked great while I built frames and only shot the staples. Then I assembled some deeps and used the 2" brads with it, now it jams about every 3rd staple. From what I gathered in the trouble shooting section I have a bent driver (very slightly) apparently. I believe it to be from shooting the brads (who knows for sure). I bought the second one to get rid of all my staples I bought with the first one. My next one will be a better one for sure.

Two Bees · January 29, 2010, 05:29:03 PM

I bought this one to use strictly for stapling frames. Haven't decided to use 1" or 1.5" staples yet though!

I will probably get a heavier duty nail gun if I were going to do boxes, bottoms, or tops.

Suggestions on what staple length to use?