Wax Moth Trap (Bottle)

Started by capt44, February 28, 2015, 09:43:44 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

capt44

I was reading a post on a wax moth trap made from a soda bottle.
I use a 2 liter plastic bottle and drill a 1 inch hole in the side.
Here is a picture of one.
I have several out and about around my beeyards.

For bait I mix 1/2 cup sugar to 1/2 cup water and 1 cup red apple cider vinegar. I then pour the mixture into the bottle and take a banana peel and cut it up in pieces and put it in the bottle also.
Or you can put some cheap red wine and a banana peel, the fermentation is what catches.
It will ferment in a couple of days attracting wax moths and yellow jackets.
I set the around the bee yard or hang them from limbs about 2-5 feet.
Hey they're cheap and they work.
Here is a picture of the Wax Moths, the Greater and smaller one.
Richard Vardaman (capt44)

BeeMaster2

Good info. I need these in my workshop where I store my supers.
Thanks for sharing.
Jim
Democracy is 2 wolves and a lamb voting on what to have for lunch. Liberty is a well armed lamb contesting the vote.
Ben Franklin

rwlaw

I use the same trap except for three smaller holes up around the neck for wasp and hornets , caught a few moths so maybe the larger hole catches more moths eh?
Can't ever say that bk'n ain't a learning experience!

capt44

I drill a 1 inch to 1 1/4 inch hole in the bottle.
Pigeon Mountains sells a beetle trap that uses a bucket from 1gallon to 5 gallon with a piece of pvc pipe stuck to the inside bottom to hold the bait and the bucket has several holes drilled around the top part of the buckets.
I bought a small one to try and they are a joke as far as hive beetle traps and the pvc pipe was stuck in place with silicone and turned loose making a big mess.
I've done better with the soda bottle traps for wax moth and yellow jackets.
Richard Vardaman (capt44)